- Home
- ยป
- Our Products
- »
- Water Purification Systems
Water Purification Systems
Water Purification System
Brand | Thermo Fisher Scientific |
Country of Origin | Made in India |
Temperature | +2 DegreeC - +35 DegreeC |
pH range | 4 - 11 |
Pressure | 2 - 6 bar / 29 - 87 PSI |
Model | Smart2Pure Pro UV/UF |
- Source: Potable tap water pretreated with Barnstead Pretreatment System
- Silt density index (SDI): <3
- Turbidity: <1 NTU
- Conductivity (reference temperature +25°C) 1500 μS/cm (670 Ω·cm)
- Hardness: Hardness stabilized
- Chlorine Max.: 0.1 ppm
- pH range: 4 - 11
- Temperature: +2°C - +35°C
- Pressure: 2 - 6 bar / 29 - 87 PSI (at a pressure >6 bar / 87 PSI a pressure reducer must be installed upstream of the system
Water Purification System
Brand | Thermo Fisher Scientific |
Frequency | 50/60Hz |
Flow Rate | 0.6 L/min. |
Country of Origin | Made in India |
Model | Smart2Pure 3 UV/UF |
Feedwater Connector | 3/4 in. NPT |
- Frequency:50/60Hz
- Feedwater Connector:3/4 in. NPT
- Product Water Type: Type 1 and 2
- Resistivity: Type 1: 18.2 Mohm.cm at 25°C; Type 2: 10 to 15 Mohm.cm at 25°C
- Conductivity: Type 1: 0.055μS/cm, Type 2: 0.067 to 0.1μS/cm
- Feedwater Source: Tap
- Flow Rate: 0.6 L/min.
- Total Organic Carbon: 1 to 5 ppb
- Endotoxin Concentration: 0.005 EU/mL
- Bacterial Content: <0.01 CFU/mL
- Particles >0.2µM/mL: <1
- Feed Water Monitoring: No
- Feedwater Pressure: 1 to 6 bar
- Operating Pressure: 1 to 6 bar
- Bacterial retention: 99%
- Depth (Metric): 400 mm
- Permeate performance: 3 L/hr. at 10°C
- Power Consumption: 0.06 kW
- RO Flow Rate: 3 L/hr.
- Includes: Internal 6L tank with vent filter, RO/pretreatment cartridge,ultrapure polisher cartridge, sterile 0.2μm filter,pressure regulator, UV lamp and UF filter.
Ultra Pure Water Purification System
Brand | Thermo Fisher Scientific |
Features | Production rate of Purified Water @ 3 ltrs/hr or more |
Flow Rate | 1 Ltr/Minute. |
Country of Origin | Made in India |
Model | Barnstead Smart2Pure |
Warranty | 1 Year |
System should be quoted along the external Pre-treatment and External RO to handle the silica free applications.
System should be standalone single stage system- produce Endotoxin and bacteria free ultrapure water Type 1 and Type 2 directly from potable water supply.
System should be capable of providing ASTM Type I (18.2 Mega ohm resistivity ) Water and have the UF cartridge to cater Biological applications
System should be capable of providing ASTM Type II (1-10 Mega ohm resistivity ) Water from potable tap water
System has feed water acceptance level of Conductivity upto 1500 µS/cm or more, Fouling Index ( SDI) > 3 and Total Chlorine less than 0.1 ppm or more
System should have a pretreatment kit with 1µm filter, Harness Stabilizer and Carbon
System should have RO Flow rate 3Ltr/hour or more
Type 1 water flow rate should be equal or more than 1Ltr/Minute
Reverse Osmosis module is made up of thin film composite polyamide RO membrane with rejection rate of 94 - 99%
System has feed water specific Purification pack before UV lamp consisting of mixed bed ion exchange resin/ micro filter / activated carbon to ensure better purification and longer life of the cartridges.
UF shall come with the life of 2 years to avoid any recurring changes.
System should have dual wavelength 185/254 nm for UV-oxidation for reducing the content of microorganisms and their metabolites to ensure the quality of Type 1 water
System should have inbuilt reservoir 3ltr or more in volume. Water is recirculated through High Purity Cartridge to maintain purity of Type 2 water in tank
System should have to fed with imported Pre-treatment water as to take the excessive care.
System be compatible for onsite IQ/OQ(Onsite Validation)
Production rate of Purified Water @ 3 ltrs/hr or more
System should be quoted with One set of Consumables including RO.